DIN 1480 Hook And Hook Turnbuckle

A DIN 1480 Hook And Hook Turnbuckle is a type of hardware used for tensioning and adjusting wire ropes. It consists of two hooks on either end, connected by a threaded body. The hooks are designed to securely attach to the wire rope, while the threaded body allows for easy tension adjustment.

Specification

Additional information

Standard	DIN 1480 Type
Material	Carbon Steel
Size	From 6mm to 36mm
Surface Treatment	Hot dip galvanized, Electro Galvanized
Production Process	Drop forged
Application	Overhead Lifting, Lashing, Towing

Description

DIN 1480 Hook And Hook Turnbuckle Specifications：

MOQ	1 Pallet, 1 Ton or 3000USD
Material	Carbon Steel
Surface Finish	Hot dip galvanized, Electro Galvanized
Sizes	From 6mm to 36mm
Technique Procedure	Drop forged
Safety Factor	5 : 1 or N/A
HS code	732690

DIN 1480 Hook And Hook Turnbuckle Sizes：

DIN 1480 Hook And Hook Turnbuckle Sizes
Size (a) (mm)	Dimensions (mm)							Weight (kg)
Size (a) (mm)	b	c	d	e	f	g	h	Weight (kg)
6	184	270	110	92	55	8.00	15	0.11
8	200	280	110	100	57	10.50	15	0.20
10	324	323	125	117	68	13.00	11	0.28
12	260	343	125	130	70	16.00	12	0.43
14	278	368	140	139	75	18.00	15	0.61
16	322	438	170	161	88	20.00	17	1.00
20	382	514	200	191	105	21.00	21	1.60
22	456	601	220	228	118	24.00	28	2.20
24	496	673	255	248	135	26.00	33	2.80
30	550	715	255	275	135	34.00	35	4.10
33	600	799	295	300	148	38.00	40	6.00
36	640	825	295	320	158	36.00	45	8.40

Key features：

Step-by-step guide on how to install DIN 1480 Hook And Hook Turnbuckles.

Installing DIN 1480 Hook And Hook Turnbuckles is a straightforward process that follows a few simple steps. Here is a step-by-step guide to help you with the installation:

Gather the necessary tools and materials: Before you begin, ensure you have all the tools and materials required for the installation. This may include a wrench, pliers, wire rope, and the turnbuckle.
Determine the placement: Decide where you want to install the turnbuckle and mark the locations for the hooks. Ensure that the wire rope is aligned correctly and will be under tension when the turnbuckle is installed.
Attach the hooks: Open them on the turnbuckle and securely attach them to the wire rope. Ensure they are correctly aligned and tightly closed to ensure a secure connection.
Thread the body: Once the hooks are attached, thread the body of the turnbuckle onto the hooks. Use a wrench or pliers to tighten the body, ensuring it is securely fastened.
Adjust the tension: With the turnbuckle installed, you can now adjust the tension of the wire rope. Use the threaded body to either tighten or loosen the pressure as needed. Ensure to achieve the desired level of stress without overstraining the wire rope.
Secure the turnbuckle: Once you have adjusted the tension, secure the turnbuckle in place by tightening any locking mechanisms or nuts that may be present. This will prevent the turnbuckle from loosening over time.
Test the installation: After the turnbuckle is securely installed, test the tension of the wire rope to ensure it meets your requirements. Make any necessary adjustments if needed.

Following these steps, you can successfully install DIN 1480 Hook And Hook Turnbuckles and ensure a secure and reliable connection for your wire rope applications.

OUR FACTORY

Raw materials of our products are made of high-quality steel that meets the standards, and the raw materials are traceable. And multiple production lines and machines minimize lead times for rigging and lifting equipment.

MANUFACTURING PROCESSES

With eight automatic forging and semi-automatic forging line of up to 1600ton press machines and specialized drillng, tapping, heat treatment and inspection equipment. Strict and standardized production process ensures you receive perfect products.

QUALITY CONTROL

All rigging and lifting products are subjected to strict working tension and breaking the tension test. Complied with ISO9001 and CE certification. Our promise to you: Guaranteed safety at work for people and materials.