Search
Close this search box.

6×7 6×9 Steel Wire Rope

6×7 steel wire rope construction general purpose wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a WSC the rope is more commonly referred to as 7×7.

Specification

Additional information

Construction

DIN3055 6×7+FC, 6×7+IWS(7×7), 6x9W+FC, 6x9W+IWR

Surface Treatment

Electric Galvanized, Hot Dipped Galvanized

Application

for various kind of cable carriage, rope and belt conveyer, cable drawing and slope well winching

Description

6×7 6×9 steel wire rope

steel wire rope

6×7 steel wire rope construction general purpose wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a WSC the rope is more commonly referred to as 7×7. The rope is very popular in smaller diameters from 0.5mm to 2mm where the cable remains very flexible. 6×7 ropes become quite rigid in the larger diameters and are often considered stiff in diameters 6mm and above. In these diameters they tend to be used for applications where the rope is omit/not working. A typical example being a mast stay. 7×7 construction is readily available in both galvanised and marine grade stainless steel.
Applications
General engineering applications
Small diameter wire rope slings
Stay wires
Fencing rope
Catenary wire
Garage door cables
Standing rigging
Hanging signs
Ski-lifts

galvanized cable wire is a steel wire configuration that’s treated with a thin layer of zinc to prevent corrosion. Galvanized wire rope is ideal for outside uses since it can withstand the elements and harsh environments.

Galvanized steel wire rope is most cost -effective in comparison to stainless steel wire rope; however the level of corrosion protection is not as great. Galvanized steel cable is slightly stronger than a comparably-sized stainless steel wire rope. Some wire ropes, such as 7 x 9 galvanized aircraft cable are also available with a vinyl coating to provide further protection. Vinyl coated galvanized cable is a popular choice in aircraft cable because of the rope is easier to handle, yet remains flexible.

Galvanized cable is common in many industries, including irrigation, agricultural, erosion control, and marine.Galvanized steel cable is often found in industrial applications, since items may brush up against the wire rope in the field, which again, are environmental conditions that galvanized steel tolerates quite well over time. For this and other reasons, Galvanized steel wire rope works exceptionally well in aerospace applications.

Specification:

Nominal Diameter Approx weight Nominal Tensile Strength
kg/100m Minimum Breaking Strength (kN)
1570N/mm2 1770N/mm2 1960N/mm2
mm FC IWR/IWS FC IWR/IWS FC IWR/IWS FC IWR/IWS
1.2 0.506 0.557 0.75 0.81 0.84 0.91 0.94 1.00
2 1.40 1.55 2.08 2.25 2.35 2.54 2.60 2.81
3 3.16 3.48 4.69 5.07 5.28 5.71 5.85 6.33
4 5.62 6.19 8.33 9.01 9.40 10.10 10.40 11.20
5 8.77 9.68 13.00 14.00 14.60 15.8 16.20 17.60
6 12.60 13.90 18.70 20.20 21.10 22.80 23.40 25.30
7 17.20 19.00 25.50 27.60 28.70 31.10 31.80 34.40
8 22.50 24.80 33.30 36.00 37.60 40.60 41.60 45.00
9 28.40 31.30 42.20 45.60 47.50 51.40 52.70 56.90
10 35.10 38.70 52.10 56.30 58.70 63.50 65.00 70.30
11 42.50 46.80 63.00 68.10 71.10 76.80 78.70 85.10
12 50.50 55.70 75.00 81.10 84.60 91.50 93.70 101.00
13 59.30 65.40 88.00 95.20 99.30 107.00 110.00 118.00
14 68.80 75.90 102.00 110.00 115.00 124.00 127.00 138.00
16 89.90 99.10 133.00 144.00 150.00 162.00 166.00 180.00
18 114.00 125.00 168.00 182.00 190.00 205.00 210.00 228.00
20 140.00 155.00 208.00 225.00 235.00 254.00 260.00 281.00
22 170.00 187.00 252.00 272.00 284.00 307.00 315.00 340.00
24 202.00 223.00 300.00 324.00 338.00 366.00 374.00 405.00
26 237.00 262.00 352.00 381.00 397.00 429.00 440.00 475.00
28 275.00 303.00 408.00 441.00 460.00 498.00 510.00 551.00
30 316.00 348.00 469.00 507.00 528.00 571.00 585.00 633.00
32 359.00 396.00 533.00 577.00 601.00 650.00 666.00 720.00
34 406.00 447.00 602.00 651.00 679.00 734.00 752.00 813.00
36 455.00 502.00 675.00 730.00 761.00 823.00 843.00 912.00
38 507.00 559.00 752.00 813.00 848.00 917.00 940.00 1016.00
40 561.00 619.00 833.00 901.00 940.00 1016.00 1041.00 1125.00
42 619.00 682.00 919.00 994.00 1036.00 1120.00 1147.00 1241.00
44 679.00 749.00 1009.00 1091.00 1137.00 1230.00 1260.00 1362.00
46 742.00 818.00 1102.00 1192.00 1243.00 1344.00 1377.00 1488.00
48 808.00 891.00 1200.00 1298.00 1354.00 1464.00 1499.00 1621.00
OUR FACTORY
Raw materials of our products are made of high-quality steel that meets the standards, and the raw materials are traceable. And multiple production lines and machines minimize lead times for rigging and lifting equipment. 
RAW-MATERIAL
Raw Material
Forged-Plant
Forged
Cast Process
Cast
Chain Process
Chain Machine
Heat Treatment Plant
Heat Treatment
Powder Plastified Plant
Powder Plastified
Package Plant
Package
Warehouse Plant
Warehouse
MANUFACTURING PROCESSES
With eight automatic forging and semi-automatic forging line of up to 1600ton press machines and specialized drillng, tapping, heat treatment and inspection equipment. Strict and standardized production process ensures you receive perfect products.
MANUFACTURING-PROCESSES-shackle
QUALITY CONTROL
All rigging and lifting products are subjected to strict working tension and breaking the tension test. Complied with ISO9001 and CE certification. Our promise to you: Guaranteed safety at work for people and materials.
G70 Chain Test
Chain Test
Clamp Test
Clamp Test
Hook Test
Hook Test
Link Test
Link Test
Shackle Tension Test
Shackle Tension Test
Snap Hook Test
Snap Hook Test

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@uulifting.com”